Verdampfer reviews: tested in Beijing (Asvape Minikit)
Verdampfer advice for Beijing, covering best practice, what to look for and where the trade-offs actually sit.
Budget matters in Beijing, but with verdampfer the cheapest option is rarely the one that lasts. We would pair the Innokin X with a 60:40 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
There is no single best verdampfer for everyone in Beijing, and anyone telling you otherwise is selling something. Two things to check before ordering: the USB-C socket on the base and whether the 2.0 Ω regular coil is the newer generation.
Two things to check before ordering: the USB-C socket on the base and whether the 2.0 Ω regular coil is the newer generation. Battery behaviour is where the Innokin X earns its keep: the 1000 mAh cell holds a usable charge for most of a day at 120 and recharges over USB-C. We would pair the Innokin X with a 60:40 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Expect roughly 1306 full puffs from a charge at 20 mg/ml, based on average session length in our testing. Delivery across Beijing is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The build quality on Innokin X is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry.
Charging over USB-C takes about 30 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Comparing this against a 60:40 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. Battery behaviour is where the Innokin X earns its keep: the 1000 mAh cell holds a usable charge for most of a day at 120 and recharges over USB-C.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 2.0 Ω regular mark before the profile flattens and a swap makes sense. In Beijing, availability of the 2.0 Ω regular coil is the practical bottleneck, not the device itself.
Specifications
These are the figures that matter day to day, and the ones worth comparing across models.
| Reference model | Innokin X |
|---|---|
| Brand family | RELX |
| Battery capacity | 1000 mAh |
| Power range | 120 W |
| Liquid capacity | 2.5 ml |
| Coil | 2.0 Ω regular |
| Bottle size | 0.6 ml |
| Liquid ratio | 60:40 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | ABS + glass |
| Charge port | USB-C |
| Connector | Q-Plus |
| Airflow | dual bottom |
| Mouthpiece | wide bore |
Flavour and performance notes
A representative profile is Cherry Lime Soda: sweet, tart, described as red cherry with a lime lift. On a 60:40 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 2.0 Ω regular mark before the coil begins to mute it.
Practical considerations in Beijing
Availability in Beijing is the factor that decides most outcomes here. Confirm the 2.0 Ω regular and the USB-C are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and CNY rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
